标题

BA series output 4-20mA or 0-5v intelligent current sensor

The intelligent BA series current sensor uses the principle of electromagnetic induction to measure the AC current in the power grid in real time and uses constant current and linear compensation technology to isolate and transform it into a standard DC signal output, or through the RS485 interface (Modbus-RTU protocol) to transmit the measurement data. DC24V or 12V safety voltage power supply, can be widely used in the field of industrial automation. BA50L(Ⅱ)-AI is an AC residual current transformer, which mainly detects the leakage current of the electrical system, can grasp the status of electrical circuits and equipment at any time, and prevent fires and other accidents caused by leakage.

ALP220-PT Series Low Voltage PT Protector

ALP220-PT series intelligent low-voltage PT protector apply to low-voltage system with rated voltage to AC 400V and rated frequency of 50Hz. ALP220-PT intelligent low-voltage PT protector, due to perfect protection, measurement, control and monitorin...

DJSF1352-RN UL certified DC Dual-circuits Monitoring DIN Rail Energy Meter

● Measurement: kWh, kVarh, Power, Current, Voltage and etc ● Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor) ● Voltage Rating: 0~1000V DC ● Application: DC Battery; Charging Pile; Solar PV and etc ● Communication: RS485 (MODBUS-RTU) ● Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors); DO/DI Function ● Display: LCD Display ● Dimension: 72*71*87.8mm (L*W*H) ● Installation: 35mm DIN Rail ● Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC ● Standard&Certificate: CE

ADL3000-E Three-phase Multi-function DIN Rail Energy Meter

● Measurement: 3-phase kWh (0.5S), Active Power, Reactive Power, Current, Voltage, Harmonic and etc ● Voltage Rating: 3x220/380V, 3x57.7/100V (3P4W); 3x380V, 3x100V (3P3W) ● Current Rating: 3x10(80)A; 3x1(6)A ● Frequency: 45~65Hz ● Commnunication: RS485 (MODBUS-RTU) and Infrared ● Multi-rate: Spike, Peak, Valley and Flat kWh ● Extra Function: Cable Temperature Measurement and DO/DI ● Display: LCD (8 digits) ● Dimension: 127*88*70mm (L*W*H) ● Wiring: 3-phase 4wire; 3-phase 3-wire ● Installation: 35mm DIN Rail ● Standard&Certificate: UL; IEC; CE

Acrel AIM-D100-ES DC Insulation Monitor insulation monitoring of energy storage DC systems Energy storage insulation

●Model:AIM-D100-ES ●Application:100~1500V DC energy storage DC systems 、power plants, DC panels in substations, electric vehicle charging devices, UPS power supply systems, photovoltaic DC systems and other DC power grids.

Acrel ADW220 Series Multi-Loop IOT Power Meter

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel ADW210-4S Series Multi-Loop IOT Power Meter

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel 48V 6 channels dc power meter for Data Center AMC16L-DETT

● Model：AMC16L-DETT ●LCD display ●Measuring Voltage Range:±dc48V ●Rated current loop input:inlet:5 outlet:20mA Voltage measure range:AC40-400V ●1*RS485 ●Commercial power monitoring:1 channel: 0-5VDC ●Overload capacity:Voltage:1.2times continued,2 times continued 1s;Current: 1.2 times continued,10 times continued 1s. ●Measurement resolution:Voltage output accuracy 0.01V; current output accuracy 0.01A; power output accuracy 0.01kw; energy output accuracy 0.01kwh. ●Basic function:Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication.

Acrel DC meter DJSF1352-RN/D-P1 rail type 2 channels DC EV chargers with CE certification

●Model:DJSF1352-RN/D-P1 ●Rated Voltage: 100V, 350V, 500V, 750V, 1000V; ●Calibrated current: 300A(can be set) Shunt: support 75 mV Hall sensor: 0-5V, 0-20mA, 4-20mA ●Accuracy Class: 1 ●Measured voltage range: 0.1Ub-1.15Ub (Umax<1000V) ●Communication protocol:RS485/Modbus-RTU; DL/T645-2007; ●Data format: O/E/N-8-1/2; E-8-1(Factory Default) ●Output Voltage: DC 0-1000V Optional function: 2 channel energy mearsuring ●●Application:charging piles, DC screens, solar power generation systems, telecommunications base stations

ACREL DTSD1352-4S DIN-rail Type Multi-circuit Power Meter 4 channels energy meters

●Model：DTSD1352-4S ●Frequency：45～65Hz ●Voltage：Rated value: AC 3×220V/380V ●Current：Rated value: Secondary input rated current：50mA ●Measurement Accuracy：Frequency: 0.05Hz, voltage and current: 0.5 class, active energy: 1 class, reactive energy: 2 class; 2nd to 31st harmonic accuracy: ±1% ●Power frequency withstand voltage：>AC 2kV/1min ●Insulation resistance：Input and output terminals to the chassis >100MΩ；

Acrel Communication base station metering AMC200L-12DE

●Model：AMC200L-12DE ● Input: DC -48V ● Overload:Voltage: 1.2 times for continuous, 2 times for 1 second; Current: 1.2 times for continuous , 10 times for 1 second ●power:DC -40V～-60V ● Insulation resistance:≥40MΩ ●Altitude:≤4000m

Acrel 3 phase 0.5S dinrail energy meter with MID ADL400-D power meter 100A without CT

● Model：ADL400-D ● Measurement: 3-phase AC kWh, kVarh, U, I, P, Q, S, PF, F and etc ● Accuracy: 0.5% (kWh) ● Frequency: 45~65Hz ● Rated Voltage: 3x380~456Vac L-L (direct connect); 3x100~120Vac L-L (via PTs) ● Rated Current: 0.01-1(6)A (Secondary access model) 0.1-10(80)A(Direct access model) 0.1-10(100)A(Direct access model) ● Communication: RS485 (MODBUS-RTU) ● Multi-rate: 4 Tariff Rates and etc ● Data Function: Frozen Data,Max Demand,etc ● Harmonic: 2~31st and total Harmonic ● Standard&Certificate: IEC; CE;CE-MID; EAC,MID ●Application:Building Energy Management,EV charger，High and low voltage distribution cabinets,Factory electricity metering,Air conditioning energy metering