标题

AIM-D100-CAD 100V~1000VDC Dual-channel insulation monitoring Device with RS485/Modbus-RTU

●Model:AIM-D100-CAD ●Brand:Acrel ●dual-channel DC ●RS485，Modbus-RTU ●Supports periodic monitoring and communication-triggered monitoring ●DC100V~1000V

Acrel ASCB2 Series Smart Circuit Breaker MCB Remote Control Circuit Breaker

●Model: ASCB2 ●Brand:Acrel ●overvoltage, undervoltage, overload, short-circuit, overcurrent and overtemperature protection. ●local electric control, local locking, remote control and timing control. ●DIN rail mounting ●1P,/2P,/3P and 4P

AIM-D500-CA Insulation monitoring device Suitable for DC charging stations 0V to 1000V AIM-D500-CA with coupling device ACPD300

●Model: AIM-D500-CA ●Brand:Acrel ●IEC 61557-8 ●50V~1000VDC ●1kΩ~2MΩ ●IN 35mm rail mounting, pluggable terminals ●RS485 / Modbus-RTU

Leakage current monitoring in TN-S power distribution system: 12-channel Residual Current Monitoring with alarm output AIM-R100.

●Model:AIM-R100 ●Brand:Acrel ●Voltage：AC 220V±10% ●Loops：12 ●Measure range：0~5000mA ●Setting range：6~1000mA ●output：1 relay output, normally open ●Protocol：Modbus-RTU

Acrel AID300-TP-40 Centralized Alarm and Display 4-inch Touch Screen HMI

ATP300 Centralized alarm and display are centralized monitoring modules for medical isolation power supply systems and residual current monitoring systems in medical locations. The product adopts a 4-inch color TFT with a resolution of 720 * 720, a capacitive touch screen design, and a time display function. The touch screen is connected to other devices (Insulation monitoring devices, residual current monitoring devices) through RS485 or CAN bus to form a complete monitoring system, achieving centralized monitoring and intelligent management of power distribution system in medical locations.

Acrel ASJ60-LD16A 16 channels of residual current monitoring device

*Monitor the residual current of AC, pulsed DC with the respective residual current transformer for each channel. *16 measuring channels per device for residual current measurement, response ranges: 1mA…30A(45…60Hz). *17 relays with N/C or N/O operation,16 relays for per residual current measuring channel, one for waterlog. *Fault trip and automatic reclosing for each channel, adjustable reclosing times and delay time.

ACREL ARB6 Arc Flash Protection Relay

1.Quickly disconnect the fault point at the beginning of arcing 2.Make it possible to quickly restore power supply 3.Extend the service life of primary equipment 4.Can realize the protection function of medium and low voltage busbars 5.Avoid casualties 6.Effectively supplement the defects of busbar protection in medium and low voltage systems

ACREL ARB6 Arc Flash Protection Relay

*.Quickly disconnect the fault point at the beginning of arcing *.Make it possible to quickly restore power supply *.Extend the service life of primary equipment *.Can realize the protection function of medium and low voltage busbars *.Avoid casualties *.Effectively supplement the defects of busbar protection in medium and low voltage systems

ASCB1-M Smart Circuit Breaker Gateway

● Over Current / Power / Temp. Protection; ● Over / Under Voltage Protection; ● Short Circuit Protection; ● Leakage Current Protection.

ASCB1-63-C63 3P Smart Circuit Breaker

● Over Current / Power / Temp. Protection; ● Over / Under Voltage Protection; ● Short Circuit Protection; ● Leakage Current Protection.

ASCB1-63-C63 4P Smart Circuit Breaker

● Over Current / Power / Temp. Protection; ● Over / Under Voltage Protection; ● Short Circuit Protection; ● Leakage Current Protection.

ASCB1LE-63-C63 4P Smart Circuit Breaker

● Over Current / Power / Temp. Protection; ● Over / Under Voltage Protection; ● Short Circuit Protection; ● Leakage Current Protection.