Product list
DC Power Meter
Panel DC Meter
Din Rail DC Power Meter
Multi Loop DC Meter
Insulation Monitors
Medical lT Lsolated Power System
Industrial lT lsolated Power System
AC Power Meter
Panel Watt-hour Meter
Din Rail Energy Meter
Multifuntion Power Meter
Prepayment Meter
IOT Wireless Energy Meter
Ammeter & Voltmeter
Data Center Meter
Data Center Meter For AC System
Data Center Meter For DC System
Small Bus-bar Meter
Power Monitoring & Controlling
ARTU Remote Terminal Meter
ARD Smart Motor Protector
WHD Temperature & Humidity Controller
ASJ Residual Current Relay
ARTM Temperature Measurement
Protection Relays For Medium Voltage Application
Transducer & Sensor
AHKC Hall Sensor
BA Current Sensor
BD Transducer
BM Analog Signal Isolator
BR Rogowski Coil Transducer
Transformer
Smart Gateway
Solar Energy Meter

Acrel industrial Insulation Monitoring Device AIM-T500L

AIM-T500L series industrial insulation monitoring and fault location system is specially developed by Acrel for IT distribution system in industrial occasions such as mine, glass factory, electric furnace and test equipment, ship, metallurgical plant, chemical plant, explosion hazard site, computer center and emergency power supply. The system has rich functions, including insulation resistance monitoring, insulation fault warning, insulation fault alarm, event recording, parameter setting, communication networking, etc. When the system has grounding fault, it can give a timely alarm and accurately locate the specific circuit of the fault to remind staff to check the fault in time.

Contact us
*Name
*Phone
*E-mail
*Message
Information
Parameter
Download
Video
Related Products

BA series output 4-20mA or 0-5v intelligent current sensor

The intelligent BA series current sensor uses the principle of electromagnetic induction to measure the AC current in the power grid in real time and uses constant current and linear compensation technology to isolate and transform it into a standard DC signal output, or through the RS485 interface (Modbus-RTU protocol) to transmit the measurement data. DC24V or 12V safety voltage power supply, can be widely used in the field of industrial automation. BA50L(Ⅱ)-AI is an AC residual current transformer, which mainly detects the leakage current of the electrical system, can grasp the status of electrical circuits and equipment at any time, and prevent fires and other accidents caused by leakage.

Acrel ADW220 Series Multi-Loop IOT Power Meter

2024-03-12

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel ADW210-4S Series Multi-Loop IOT Power Meter

2024-03-12

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel 48V 6 channels dc power meter for Data Center AMC16L-DETT

2024-02-23

● Model：AMC16L-DETT ●LCD display ●Measuring Voltage Range:±dc48V ●Rated current loop input:inlet:5 outlet:20mA Voltage measure range:AC40-400V ●1*RS485 ●Commercial power monitoring:1 channel: 0-5VDC ●Overload capacity:Voltage:1.2times continued,2 times continued 1s;Current: 1.2 times continued,10 times continued 1s. ●Measurement resolution:Voltage output accuracy 0.01V; current output accuracy 0.01A; power output accuracy 0.01kw; energy output accuracy 0.01kwh. ●Basic function:Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication.