Product list
DC Power Meter
Panel DC Meter
Din Rail DC Power Meter
Multi Loop DC Meter
Insulation Monitors
Medical lT Lsolated Power System
Industrial lT lsolated Power System
AC Power Meter
Panel Watt-hour Meter
Din Rail Energy Meter
Multifuntion Power Meter
Prepayment Meter
IOT Wireless Energy Meter
Ammeter & Voltmeter
Data Center Meter
Data Center Meter For AC System
Data Center Meter For DC System
Small Bus-bar Meter
Power Monitoring & Controlling
ARTU Remote Terminal Meter
ARD Smart Motor Protector
WHD Temperature & Humidity Controller
ASJ Residual Current Relay
ARTM Temperature Measurement
Protection Relays For Medium Voltage Application
Transducer & Sensor
AHKC Hall Sensor
BA Current Sensor
BD Transducer
BM Analog Signal Isolator
BR Rogowski Coil Transducer
Transformer
Smart Gateway
Solar Energy Meter

Din Rail three phase energy meter for solar PV Zero Export Meter ADL400

●Model:ADL400 ● Measurement: 3-phase AC kWh, kVarh, U, I, P, Q, S, PF, F and etc ● Accuracy: 0.5% (kWh) ● Frequency: 45~65Hz ● Rated Voltage: 3x380~456Vac L-L (direct connect); 3x100~120Vac L-L (via PTs) ● Rated Current: 3x10(80)A AC (direct connect); 3x1(6)A AC (via CTs) ● Communication: RS485 (MODBUS-RTU) ● Multi-rate: 4 Tariff Rates and etc ● Data Function: Frozen Data,Max Demand,etc ● Harmonic: 2~31st and total Harmonic ● Standard&Certificate: IEC; CE;CE-MID; EAC ● Application:Solar PV /Zero Export Meter,Building Energy Management,EV charger，High and low voltage distribution cabinets,Factory electricity metering,Air conditioning energy metering

Contact us
*Name
*Phone
*E-mail
*Message
Information
Parameter
Download
Video
Related Products

BA series output 4-20mA or 0-5v intelligent current sensor

The intelligent BA series current sensor uses the principle of electromagnetic induction to measure the AC current in the power grid in real time and uses constant current and linear compensation technology to isolate and transform it into a standard DC signal output, or through the RS485 interface (Modbus-RTU protocol) to transmit the measurement data. DC24V or 12V safety voltage power supply, can be widely used in the field of industrial automation. BA50L(Ⅱ)-AI is an AC residual current transformer, which mainly detects the leakage current of the electrical system, can grasp the status of electrical circuits and equipment at any time, and prevent fires and other accidents caused by leakage.

Acrel ADW220 Series Multi-Loop IOT Power Meter

2024-03-12

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel ADW210-4S Series Multi-Loop IOT Power Meter

2024-03-12

●Model：ADW210-4S ● AC 3×220/380V ● 100A 400A 600A ● postpaid mode ● LCD display ● kWh Class 1 ● DIN 35 mm ●Application:Building Energy Management, Multi circuit electrical energy measurement

Acrel 48V 6 channels dc power meter for Data Center AMC16L-DETT

2024-02-23

● Model：AMC16L-DETT ●LCD display ●Measuring Voltage Range:±dc48V ●Rated current loop input:inlet:5 outlet:20mA Voltage measure range:AC40-400V ●1*RS485 ●Commercial power monitoring:1 channel: 0-5VDC ●Overload capacity:Voltage:1.2times continued,2 times continued 1s;Current: 1.2 times continued,10 times continued 1s. ●Measurement resolution:Voltage output accuracy 0.01V; current output accuracy 0.01A; power output accuracy 0.01kw; energy output accuracy 0.01kwh. ●Basic function:Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication.